How to install solar led street light？
solar street lights square measure straightforward to put in. you'll merely like common hand tools to assemble the sunshine. For larger homes, however, we are able to give onsite coaching and technical help. For these multiple installations, hiring technicians with skilled certificates, specializing in lamp installation is usually recommended.
what's going to you wish to put in a star led street light wholesale? What does one ought to prepare before installation?
Before the beginning of any installation, check that to try and do the subsequent steps.
1. Surround the development space with guard lines.
solely installation specialists and personnel should be allowed within the construction space. browse the installation manual and inform yourself about the installation procedures, the circuit diagrams, and also the safety measures you need to take before you proceed with the installation.
2. Installation
Installation of the muse. to put in the muse of your star street light-weight, opt for A level and flat ground, with no inclination. Screw and secure the premise Cage to the bottom victimization the four screws. One aspect of the premise Cage ought to be parallel to the sting of the road. Secure the premise Cage with concrete, and this can function the muse of your lamp.
Installation of the Battery and Battery Box. Place the battery beside the premise Cage, underground, at regarding 600 millimeters. Follow the electric circuit diagram on however the battery is connected.
3. Setup the road Lamp.
A. elevate the lamp pole off the bottom for one meter, with the employment of a supporting bench.
B. Install and secure the star Bracket at the highest of the lamp pole. Place the electrical device on the star Bracket and secure it with bolts. star Panels ought to be handled with care. Follow the electric circuit diagrams on however the star Panels are connected to the battery, the controller, and also the solar led street light manufacturers
C. Install the sunshine Fixture on the lamp pole. Place the sunshine Fixture on the bottom, with the rear half facing upward. Press the red buttons on either side of the sunshine Fixture. flip the sunshine Fixture around, and screw the plastic black lamp holder.
Place the Lamp
semiconductor diode light-weight bulb within the holder. If electronic ballast is required, place it within the sunshine fixture. Follow the circuit diagram once you connect the sunshine fixture to the controller. Connect and secure the sunshine fixture to the lamp pole.
D. Check installation and connections to substantiate that everything is within the right place. check that that wires and elements square measure connected in keeping with the electric circuit diagram.
E. Use a crane to erect the lamp pole. make sure that the lamp pole is upright on the lowest plate. Fix and secure it with bolts.
F. Place the controller within the lamp pole, with the proper wires and leads properly connected to the controller. certify the erected street light-weight is functioning and behaving obviously.
Congratulations! you've got currently with success erected and put in Your solar lights wholesale USA. check that to follow the directions and safety pointers to confirm a victorious installation. If you want to know more about solar lights wholesale, please click here!
